老地方冰果室交流區

請問各位不知道有沒有人知道，有哪幾款LCD可以接MAC又可接PC？還是說只要買一些轉接頭就可解決問題？那要買怎樣的轉接頭呢？

我看上Pillip Brillance series, 可以用來接我的老mac (power machintosh 7100/80) for my kid?

Thanks

7100/80的接頭是DB15,Pillip Brillance series的接頭還是VGA 15 pins吧?本來可以用VGA(PC) to DB15(MAC) adaptor,分別有dip switch (for multiple resolution setting),

和沒有的

但7100的 video circuit不支援1024x768 display的,還是要找張Nu-bus display card(支援1024x768的)接上

[ 11-08-2001: 留言編輯者: 老殊 ]

hello,

Thanks for so detailed answer.
I think I have nu-bus display card in my old mac.

So first I bought an adapter as you pictured in your answer and connected to my PC's monitor. If it works, then I know I can buy any PC compatible LCD for this old mac, right?

soso

Hello Soso,

Before you buy the adaptor, you can check the Nu-Bus display card to see if there are both DB15 & VGA outputs. I just have a look of my PCI Matrox MII, there is VGA output. I know Nu-Bus is mainly a Mac thing, just in case you can save it...

Hi,

How to tell DB15 or VGA output/input ?
If I am not wrong, I also have Matrox MII card on my PC?

DB15: 15 pins in 2 rolls:

My Matrox has gone through a BIOS upgrade for Mac, please visit Macgazine

WOW!

You are cool.
This old Matrox MII card is workable on my old mac. Terrific.

Yes, I'm sure my old mac has the Nu-bus display card (there is also video in/out and DB15 on it.)
Thanks a lot.

Hi Soso,

Got your message but you have disable receiving private mail function in UBB, so I can't reply to the message....

What's the model of your PC monitor? And which adaptor did you buy?
7100 does't come with PCI slots, it's a NU-BUS slot only. Your Matrox can't be used with 7100.

Hi 老殊,

謝謝您!
我後來和一個朋友要到viewsonic monitor附送的Mac adaptor, 用來接我的7100和pc monitor,一切就OK了,
我想之前買的adaptor中間沒有跳線,所以不合用.

謝謝