有關usb的問題請大家幫忙小弟
發表於 : 01/24/2002 10:52 pm
小弟買的張aha usb2.0的卡裝在我的9600上面
開機後從蘋果系統設置裡看得到在pci槽上有顯示
usb卡但裝了驅動程式後始終無法抓到usb的周邊
上aha網站上面有提到一些原因但是全英文的我看不懂
我把他貼出來希望看得懂得能幫我解答一下謝謝
Q: Why does the USB2connect not work with pre-rev.B beige G3 systems?
The host controller chip used is a 烝ultifunction device. This means that it actually has more than one function internally. These functions are the two OHCI controllers and one EHCI controller. Only beige G3 rev. b or newer systems can support multifunction devices.
[img]images/smiles/icon_confused.gif[/img]
開機後從蘋果系統設置裡看得到在pci槽上有顯示
usb卡但裝了驅動程式後始終無法抓到usb的周邊
上aha網站上面有提到一些原因但是全英文的我看不懂
我把他貼出來希望看得懂得能幫我解答一下謝謝
Q: Why does the USB2connect not work with pre-rev.B beige G3 systems?
The host controller chip used is a 烝ultifunction device. This means that it actually has more than one function internally. These functions are the two OHCI controllers and one EHCI controller. Only beige G3 rev. b or newer systems can support multifunction devices.
[img]images/smiles/icon_confused.gif[/img]