老地方冰果室交流區

在我的網站中
一部份的影音檔使用了streaming server的連結
不知是否無誤
希望大家幫我看看
若有所誤失還請告訴我
好讓正在學習的我
有機會學習
謝謝 ！！

www.jerrylu.ccom
請點選 <作品訊息> 中的 <其他>

請多多指正!!
Thanks!!

Server not found

jerrylutaiwan 寫:在我的網站中
www.jerrylu.ccom

"www.jerrylu.com" is it correct?

yu68121 寫:

jerrylutaiwan 寫:在我的網站中
www.jerrylu.ccom

"www.jerrylu.com" is it correct?

我想是他們 DNS 有點問題，現在就找得到這個 DN 了....

對不起!
我沒打對字
應該是

www.jerrylu.com

進入之後請點選

<你打開了通往其他世界的窗口吧!!>

這句話
就可以測試我的Streaming server的連結是否正確了

主畫面的MV並不是連自Streaming server

Sorry & Thanks!!

沒問題，一切 OK！我從美國連上去都可以看得到。

多謝解惑!!

有些朋友回應
他們遇到如下之訊息
不知是否為防火牆或其他設定上的原因
還請高手指正

Error/ This program does not support the protocol for accessing rtsp://xxxxxxxxx.mp4

Quicktime window / 400:bad Request

jerrylutaiwan 寫:多謝解惑!!

有些朋友回應
他們遇到如下之訊息
不知是否為防火牆或其他設定上的原因
還請高手指正

Error/ This program does not support the protocol for accessing rtsp://xxxxxxxxx.mp4

Quicktime window / 400:bad Request

另有人反應
用ｐｃ和ｍａｃ試了一下網頁
ｍａｃ的部份
完全正常
首頁的影片和歌曲都聽的到
連結出去的部份
點了之後
會跳出ｑｕｉｃｋｔｉｍｅ的視窗
也看得到影片和歌曲

ｐｃ就有點怪
首頁只聽的到歌
看不到畫面

連結出去的部份
跳出新的視窗
但是會顯示語法錯誤
完全看不到
雖然ｐｃ的ｑｕｉｃｋ已經是下載最新的版本了
但還是這樣
不知是不是因為ｗｉｎ2000的問題
還是ｉｅ或ｑｕｉｃｋｔｉｍｅ
的設定值沒弄好 ?
亦或網頁本身就該分開做呢(Mac 版 & PC版)?

Thanks!!

在這裡：

http://www.raymondjames.com/software.htm

有提到類似的錯誤訊息，解決方法如下：

10061 – Connection Failed Error
Some users may experience a "10061 - Connection Failed" error. This is usually due to an incorrect streaming transport setting on the player and is easy to fix.


From the desktop, double-click on the QuickTime Player icon to open the application (or from the Windows Start menu: Start/Programs/QuickTime/QuickTime Player). From the Edit menu, choose Preferences, then Streaming Transport. A QuickTime Settings window will open with two transport settings to choose from. If you are not behind a firewall, select "Use UDP, RTSP Port ID 554" (the top one), or if you are behind a firewall that does not allow port 554, select "Use HTTP, Port ID: 80." Then close the QuickTime Settings window. If both of these settings work on your computer, UDP is the preferred setting for optimal performance.

多謝 !!!

Got it!!
Thanks!!!

bryanchang 寫:在這裡：

http://www.raymondjames.com/software.htm

有提到類似的錯誤訊息，解決方法如下：

10061 – Connection Failed Error
Some users may experience a "10061 - Connection Failed" error. This is usually due to an incorrect streaming transport setting on the player and is easy to fix.


From the desktop, double-click on the QuickTime Player icon to open the application (or from the Windows Start menu: Start/Programs/QuickTime/QuickTime Player). From the Edit menu, choose Preferences, then Streaming Transport. A QuickTime Settings window will open with two transport settings to choose from. If you are not behind a firewall, select "Use UDP, RTSP Port ID 554" (the top one), or if you are behind a firewall that does not allow port 554, select "Use HTTP, Port ID: 80." Then close the QuickTime Settings window. If both of these settings work on your computer, UDP is the preferred setting for optimal performance.

請教高手
我的網站
www.jerrylu.com
已全面將所有的影片素材
連線至Streaming server後

有些Mac & Pc user反應
即使在依各自的情況(Firewirre)
重設Quicktime Preference的Transport setting後
還是抓不到streaming server(Not Found 404)
(當然也有些人是抓到了,但並非全面性的)
我不知是我在Streaming Server的這端還該做些甚麼
改善種現象
而這是甚麼原因造成的呢
盼解惑
謝謝!!

bryanchang 寫:在這裡：

http://www.raymondjames.com/software.htm

有提到類似的錯誤訊息，解決方法如下：

10061 – Connection Failed Error
Some users may experience a "10061 - Connection Failed" error. This is usually due to an incorrect streaming transport setting on the player and is easy to fix.


From the desktop, double-click on the QuickTime Player icon to open the application (or from the Windows Start menu: Start/Programs/QuickTime/QuickTime Player). From the Edit menu, choose Preferences, then Streaming Transport. A QuickTime Settings window will open with two transport settings to choose from. If you are not behind a firewall, select "Use UDP, RTSP Port ID 554" (the top one), or if you are behind a firewall that does not allow port 554, select "Use HTTP, Port ID: 80." Then close the QuickTime Settings window. If both of these settings work on your computer, UDP is the preferred setting for optimal performance.